Foundation repair
We check where a crack runs and whether the stem wall or footing has shifted, then repair the block or concrete and deal with the cause instead of just filling the line.
Masonry contractor in Redlands, CA - new brick and mortar matched to older walls
Fieldstone Rialto Concrete and Masonry repairs and builds brick, block and stone work in Redlands, CA, from worn mortar and chimneys to block walls, walkways and outdoor kitchens, matched to what's already on your property.
How masonry jobs work in Redlands
Redlands has its own city code, and any home project inside the city falls under it, from a new block wall along the property line to a rebuilt chimney. I keep that in mind from the first walk-through on a Redlands job, because a wall built to the wrong rules is a wall you end up paying for twice.
On your job, the price moves with how much brick, block or stone is damaged once we look closely, how hard the old material is to match, and how easy it is to get our crew and materials into your yard. The schedule turns on how much has to come out before we can build and how long the mortar or concrete needs before the next step. Your own figure comes on the written estimate, which says what we'll do and why.
As a masonry contractor in Rialto, CA, we're close enough that Redlands is an easy drive, and we do the same work in Highland next door and out west in Upland. Around Redlands we often find older brick and stone sitting next to newer block, so matching mortar color and brick size is a big part of the work here.
A straight yes or no
I'll tell you quickly whether a wall is worth repairing or needs rebuilding, because waiting on an answer holds up everything else you're planning for the house and yard.
Fix the cause once
We'd rather fix what's behind the damage, like a failing footing or water getting behind brick, than patch the crack, because a wall that's redone later costs your family twice.
The owner runs the job
I'm the one who walks your property and writes the estimate, and I'm on site running our crew while the work gets done, so the person you talked to stays answerable.
Masonry services we do in Redlands
Chimney repair
Loose brick, a cracked cap on top and worn joints are the usual calls, so we reset or replace brick, rebuild the cap and repoint before water gets deeper into the chimney.
Tuckpointing
When the mortar between bricks has gone sandy or recessed, we grind out the old joints and pack new mortar matched in color and strength to the brick, so the wall sheds water.
Brick repair
Cracked, flaking or loose bricks get cut out and replaced one at a time, and we hunt for a size and color that sits beside your older brick instead of standing out.
Driveway pavers
We dig out, compact a solid base and set pavers inside a firm edge so they hold their place under cars, and we plan the pattern around your walkways and garage.
Retaining wall construction
For a yard with a grade change, we size the footing and plan drainage behind the wall first, because water trapped behind a retaining wall is what usually pushes it over.
Masonry restoration
Older brick and stone that's stained, worn or patched badly over the years gets cleaned gently, repaired and repointed so it looks like itself again rather than like a newer wall.
Fireplace installation
We build masonry fireplaces and surrounds to the layout of your room and the maker's instructions for any firebox or insert, and set the firebrick and hearth before the face goes on.
Stone veneer installation
We put up the moisture barrier, wire lath and a base coat of mortar before any stone goes on, because veneer usually fails from water getting behind it, not from the stone.
Concrete block walls
Property-line and side-yard block walls get a proper footing, steel and grout in the cells, and a cap that matches the stucco or block already on your lot.
Foundation block wall installation
For additions and garages, we lay foundation block on a level footing sized for the load, then fill the cells with steel and grout so the wall works as one piece.
Outdoor kitchen masonry
We build the block frame for a grill island or bar, leave openings sized to the appliances you've picked, and finish it in stone, brick or stucco to match your patio.
Walkway construction
We lay walkways in concrete, pavers, brick or flagstone on a compacted base, sloped slightly so rain runs off instead of pooling at your door or settling the path.
Brick wall installation
Garden walls and brick fences go up on a real footing, with joints pressed smooth and a cap set to shed water, and we look for brick that matches your house.
Stone masonry
We set natural stone for walls, steps, columns and planters, fitting each piece by hand so the joints stay tight and the weight sits on stone, not on mortar alone.
Brick pointing
When only some joints are cracked or missing, we point just those areas with mortar matched to the old, which costs less than redoing a whole wall and keeps the original look.
Get a written masonry estimate for your Redlands home
Send the form and we'll reply within one business day. I come out, walk the job with you, measure and take photos, then give you a written estimate, free and with no pressure to book.
Say what you're seeing
A line about the crack, the loose brick or the backyard project you've been putting off tells me what to look at closely when I walk your property.
Matching what's already there
Tell me if the new work needs to match your house, and I'll look for brick, stone and a mortar color that blend in before I put a price on it.
Licensed and insured
We're licensed and insured, and our work is backed by our satisfaction guarantee, so you know who stands behind the wall after our crew packs up.
Questions about masonry work in Redlands
Straight answers to what Redlands homeowners usually want to know before a wall, chimney or brick job gets started.
Which building code does Redlands use for masonry work?
Redlands uses the 2025 California Building Code, Volumes 1 and 2, as its building code. The city changed parts of the state text, and those changes count as part of the local code, so a block wall or chimney here is built to the city's version rather than the state text alone. We go over how it touches your project at the estimate.
Where can I read the building code Redlands adopted?
The city keeps its adopted building code on file in the office of the City Clerk, and you can ask that office if you want to read the text yourself. If something in it touches your wall or chimney, bring it up when I'm out for the estimate and we'll go through it together.
Should I repair my old brick wall in Redlands or tear it down and rebuild?
Repair usually makes sense when the footing is sound and the wall still stands straight up, because new mortar or replaced brick fixes what's wrong on the surface. If the wall leans, the footing has cracked or the brick is failing across the whole face, rebuilding often costs less over time than patching it twice. I'll tell you which on the walk-through.
Masonry work in the cities we serve
These are the cities with their own page on our site, and we work in other nearby cities too. If your address isn't listed, call or send the form and ask.
Tell us about your Redlands masonry job
Call (909) 546-5001 until 10 PM on weekdays or send the form, so a small crack gets looked at before it spreads.